Skip to content
Welcome to Technohobbies
Welcome to Technohobbies

XAV 3s 11.1v 4200mAh 50C Hard case Li-Po Battery with Deans Plug T Plug for RC Cars, Boats and Drones

$69.95

3s 11.1v 4200mAh 50C Li-Po Battery with Deans Plug 

As a premium quality battery, it will get you out of the trouble and danger caused by some low-quality Li-Po Batteries.

This is a good upgrade battery if you have a RC drone, quadcopter, helicopter, car and etc. It is a battery perfect for your RC bits that require a quite high power. It is also always handy to get a spare and big capacity battery when you play your RC bits outside.

Specification

  • Battery Chemistry: Lithium Polymer
  • Voltage: 11.1V
  • Capacity: 4200mAh
  • Discharge Rate(C): 50C
  • Connector Type: T Plug/DeansPlug
  • Balancer Connector Type: JST-XH
  • Length: 140mm
  • Depth: 48mm
  • Height: 26mm
  • Battery Weight (dev.5g): 302g

Safety Notes

  1. To ensure safety, please check and confirm Li-Po battery surface and voltage is normal before using.
  2. If the new Li-Po battery won’t hold a full charge or loose charge very quickly in short time, then please use a Professional Li-po battery Charger to charge and recycle several times first. (See our Li-Po Balance charges from $95 upwards. 
  3. For most Li-Po battery, the safest charge rate is 1C – 2C.
  4. Never Over-charge above 4.2V per cell and Over-discharge below 3.2V per cell. (Normal cell voltage is between 3.7V~4.2V). 
  5. When charging with a professional balance charger, always charge the battery 100-200mAh less than the amperage of the battery.  For example if the battery is 5000mah then charge at 4900mah.
  6. Never charge Li-Po battery unattended.
  7. If you are not using the battery for a while, please plug the battery off the car and leave it at the storage charge voltage which is 3.85v for each cell.