Axial 1/10 Wraith 1.9 Electric 4WD RTR RC Rock Racer AXI90074T
Axial 1/10 Wraith 1.9 Electric 4WD RTR RC Rock Racer AXI90074T
At its foundation the Axial Wraith 1.9 4x4 is the first full tube frame chassis in RC, providing the durability you need for aggressive action on tough terrain. Refining the proven 2.2 Wraith chassis design, Axial improved the ground clearance for this version by reducing the size of its skid plate and lower rails. Boatsides on the skid plate improve handling by helping the vehicle slip through and past obstacles.
Axial enthusiasts have come up with several scratch-built methods to give Wraith 2.2 rigs smaller wheels for closer-to-scale proportions. The Wraith 1.9 RTR, however, is the first and only one created by Axial designers specifically to deliver Wraith bashability and technical rock crawling capability while running on 1.9 wheels and tires. This vehicle expertly merges the original Wraith full tube chassis with the AR44™ axles and AX10™ transmission of the SCX10™. Further adjustments, such as reducing skid plate and lower rail size, increase ground clearance enough to power over rocks, sand, mud, and any other kind of backyard bashing. The Axial® Wraith™ 1.9 is a new, 1/10 scale, ready-to-run platform that delivers it all — with the exciting scale looks you desire to have!
The Wraith 1.9 truck's drivetrain uses a powerful brushed 540 motor to turn its proven front and rear, single piece AR44™ axles. The pinion gear is 6mm above center, raising the ground clearance and improving driveshaft angles. Axial boosts the overall strength with metal gear construction; large, flex-reducing load bearings; increased gear surface contact; and a gear ratio that's optimized to reduce torque twist.
Adjustable oil-filled, coil over shocks allow you to tune dampening for the best handling on any track. Molded from durable S30 compound, the officially licensed Nitto Grappler tires have a large block tread that gets excellent bite on a wide range of surfaces.
The Wraith 1.9 truck looks ready to climb mountains even when it's standing still. At the front end of its polycarbonate body you'll find a molded plastic grille, radiator detail, and two large, LED-equipped headlights. Raise the hood and you'll see a replica V8 engine tucked in front of the chassis battery mount. That V8 isn't just for show. It's also a rugged receiver box that guards the model's Spektrum™ SRX200 receiver from water, dust, and debris.
The Axial Wraith 1.9 RTR comes factory-assembled and requires only a battery pack with IC3™ connector, compatible battery charger, and four AAs for the included Spektrum 2.4GHz transmitter. It's easy enough for new RC hobbyists, with the design sophistication to take experienced drivers on incredible adventures far beyond the end of the road.
- Go anywhere, go fast!
- Strong tube chassis with forward-mounted battery position
- Boatsides/skid plate for extra clearance
- Chassis-mounted servo for a realistic look
- Easy access to electronics, and adjustable battery tray
- New body design with LED lights, and grille, radiator, fender, and V8 engine details
- Spektrum™ Transmitter and Receiver
- Licensed 1.9 Nitto Trail Grappler M/T tires on KMC XD229 Machete crawl wheels
- Compact AX10™ transmission
- AR44™ hi-pinion axles for added ground clearance
- WB8 HD Wildboar™ driveshafts
- Dual slipper clutch with 32-pitch gearing
- Length: 451.6mm (17.8)
- Width: 222.3mm (8.8”)
- Height: 222.3mm (8.8”)
- Weight: 2.1kg (4.65 lbs)
- Wheelbase: 308mm (12.13”)
- Ground Clearance: 69.4mm (2.73”)
- Drivetrain: 4WD
- Packaging size: L 62 x W 35.3 x H 32cm
- Shipping weight: 17.6Kg
- Gross weight 6Kg
- Battery 6-Cell NiMh or 2-Cell LiPo
- Compatible Charger
- 4 x AA Batteries for the Remote
| Car | |
|---|---|
| Assembly Type: | Ready to Run |
| Max LiPo Power: | 3S (11.1v) |
| Size (Scale): | 1/10 |
| Skill Level: | Intermediate |
| Power Source: | Electric Brushed |
| Chassis Type: | Rock Crawler |
| On/Off Road: | Off Road |
| Drivetrain: | 4WD |
| Factory specs | |
|---|---|
| Max LiPo power: | 3S (11.1v) |