Volantex 747-8 Trainstar Ascent (PNF) 4CH Electric RC Trainer 1400mm

The Volantex 747-4 Trainstar airplane is the most intelligent RC airplane ever offered by VolantexRC. Thanks to the sepcial airfoil design that makes RC flight incredibly easy, even for the least experienced user.  With its smooth flight capability battles windy conditions, all your control feeling is  smooth and responsive. And the auto center ability is much helpful for beginners.

Requiring just minutes to assemble, you’ll appreciate how its quiet brushless power system delivers outstanding performance with long, enjoyable flights. Plus it’s built to last from lightweight EPO material and plastic Unibody fuselage, that’s superb durable to handle everyday flying punishment without getting bent out of shape. After you’ve mastered the basics of flight, the Trainstar is capable of performing a complement of aerobatic maneuvers such as loops, rolls, and even inverted flight.

Also the 4 channel Trainstar Ascent with a 1400mm wingspan is the ideal size for as an electric RC trainer. It has all the attributes of a good trainer airplane, first off, it is strong, the high wing gives it stability, and the wide, large-wheeled landing gear with a steerable tailwheel gives it excellent ground handling. The fuselage is blow-molded from a tough, rugged, and flexible plastic with plywood formers that will take a lot of punishment, it will bend and flex before breaking. The wings and tail components are equally as strong, these are manufactured from tough EPO foam, the foam hinges are also reinforced with plastic hinges for strength. Assembly is very straightforward, no gluing is required, the tail parts are screwed on and the wings attach via a metal spar. The wings are kept safely in place using the popular Volantex fast connect clips, after flying, simply squeeze the clips to release the wings.

Being "Plug N Fly", the Trainstar Ascent has the following pre-installed, a powerful 4023-1050KV brushless motor, a 40A electronic speed controller with BEC, and the 4 x 9g servos. All you have to do is attach the supplied control horns to the ailerons, elevator, and rudder, then fit the control push-rods. The supplied hardware pack also includes a 12x6 propeller, spinner, and propeller to motor adapter.

The Trainstar Ascent is the ideal airplane for anyone entering the hobby and wishing to learn to fly due to its large wing area, high wing configuration, and rugged design. Once you have gained experience its large powerful control surfaces and abundance of power make it also ideal as an aerobatic trainer, this makes the Ascent the perfect all-rounder airplane.

Features:
• The perfect trainer for beginners to RC flying
• High wing configuration for stability
• Tough, rugged, blow-molded fuselage with plywood formers
• Wings and tail components are made from tough EPO
• Fast connect/disconnect clips for holding the wings to the fuselage
• Wide, 2 wheeled landing gear with large tundra style wheels
• Plug and fly with a pre-installed motor, ESC, and servos

Specs:
Type: Volantex 747-8 Trainstar Ascent (PNP) 4CH Electric RC Trainer
Experience Level: Beginners/intermediate
Wing Span: 1400mm (55")
Length: 1010mm (43.5")
Motor: 4023-1050KV brushless outrunner
ESC: 40A brushless with switch-mode BEC
ESC Connector: XT60
Propeller: 12x6
Servos: 4 x 9g
Radio Channels: 4
Weight: 820g without battery

ESC Connector: XT60
Propeller: 12x6
Servos: 4 x 9g
Radio Channels: 4
Weight: 820g without battery

Included:
Volantex 747-8 Trainstar Ascent (PNF) 4CH Electric RC Trainer
1 x 4023-1050KV brushless motor
1 x 40A w/BEC brushless ESC
4 x 9g servo
1 x 12x6 propeller with spinner
1 x propeller adaptor
Horns, screws, and push-rods

Included:
Volantex 747-8 Trainstar Ascent (PNF) 4CH Electric RC Trainer
1 x 4023-1050KV brushless motor
1 x 40A w/BEC brushless ESC
4 x 9g servo
1 x 12x6 propeller with spinner
1 x propeller adaptor
Horns, screws, and push-rods

Required:
2200mAh 3S (11.1V) LiPo battery (25C or greater)
4ch or more transmitter and receiver
Suitable LiPo charger