Skip to content
Welcome to Technohobbies
Welcome to Technohobbies
Volantex RC -Phoenix V2- 2000mm Glider PNP 759 - Latest version

Volantex RC -Phoenix V2- 2000mm Glider PNP 759 - Latest version

by technohobbies.com.au
Sale
$369.00
$349.00

Volantex 759-2 Phoenix V2 (PNP) EPO Composite RC Glider 2000mm

Made of tough EPO, the Phoenix V2 glider fuselage has been blow molded with pylon formers to make it near indestructible. The Phoenix was made to last a lifetime with its smooth, rigid, yet remains light enough for the glider to perform. Assembly can be completed in under 15 minutes so you'll be flying in no time.

Both the main wing and tail are screwed into place, while the two wing halves have a carbon fiber rod for added strength. The main wing is 2m long and includes ailerons and flaps for better plane control. There is now a single wheel built into the fuselage for easier landings plus a new tail design for better strength.

All 9g servos, speed controller, and brushless outrunner are included. Just add your own receiver and battery to be flight-ready! The Phoenix will rise from the ashes again and again with this super durable glider.

Phoenix V2 EPO Composite RC Glider 2000mm (78.7") (PNF)

This is one of the best professional level Gliders with 2m wingspan you can buy. Quick and easy to assemble with no glue required.  The powerful Brushless out-runner motor can fly or glide in any conditions.  Capable of performing superb aerobatics due to the slim and attractive; streamlined fuselage.  It is also fitted with 

The fuselage also includes a pre-installed main wheel which will protect the underside and provide smoother and easier landings. The EPO horizontal stabilizer and elevator are also reinforced with carbon to improve the strength and stop flutter when flying at high speeds. No glue is required when assembling, the vertical and horizontal stabilizer are simply screwed to the rear of the fuselage.  

The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.
This is a must have Plane/Glider in your collection.

Description:
  • Brand Name: Volantex 
  • Item Name: Phoenix V2 
  • Item NO.: 759-2
  • Material: EPO & Plastic
  • Wingspan: 2000mm
  • Overall Length: 1160mm
  • Weight: 1160g
  • Flying Weight(without battery): 1000g
  • Motor: 4023 1050KV Outrunner Brushless motor
  • ESC: BL 30A Brushless ESC
  • Servo: 9g *6
  • Propeller: 1060 Folding Propeller
  • Flaps: Yes (optional)
  • Retracts: No
  • Minimum Age Recommendation: 14 years old
  • Experience Level: Beginners ~ Expert
  • Recommended Environment: Outdoor
  • Is Assembly Required: Yes
  • Assembly Time: Less than 20min

Recommended Items for Phoenix V2 (Not Included):
  • Battery: 3S 11.1V 1500-2200mAh LiPo
  • Charger: Balance Charger
  • Radio System: 2.4G 6 Channel Transmitter
  • 6 Channel Receiver 

Specs:
Wingspan: 2000mm (78.74in)
Length: 1160mm
Flying Weight: 980g
Motor: Brushless 28 Size 1050Kv
ESC Included: 30A

Box size: 


Required:
3S 11.1V 1500~1800mAh LiPo Battery
6 Channel Transmitter and Receiver


Features:
• A perfect sport and aerobatic electric glider
• Tough, rugged, blow-molded fuselage
• 2 wing spars and carbon reinforcement for strength
• Wings and tail are made from tough EPO material; lightweight and durable
• Fast connect/disconnect clips for holding the wings to the fuselage
• Pre-installed main wheel for protection when landing



Note:
PNP version, transmitter, receiver, battery and charger are not included.

Some parts available at Techno Hobbies.